德國heidenhain海德漢長度計使用說明書

海德漢的增量式長度計能在*個長的測量范圍內提供很*的*度。這些堅固耐用的長度計根據不同的應用有不同的產品類型。

他們在度量行業有廣泛的應用，多點測量*、測試設備檢測和位置測量裝置。

選擇海德漢*的長度計的理由。

*

海德漢*的長度計*具有的*還體現它的全量程上。無論是測量10 mm還是100 mm的零件，其實際尺寸的測量*度是*樣的。海德漢*的長度計具有*重復性特點，可用于比較測量，例如用于大批量生產。

測量范圍大

海德漢*的長度計測量范圍有12 mm、25 mm、30 mm、60 mm或100 mm多種選擇，因此其*臺測量設備可以測量非常不同的零件，避免頻繁地更換價格昂貴的量塊或模板。

堅固耐用

海德漢*的長度計是為工業環境而制造的。它具有始終如*的*和的溫度穩定性。*以，可以廣泛應用于生產設備和機床中。

產品簡介

主要特點

ACANTO

• *式測量方式

• **防護能力

• 長度計診斷

HEIDENHAIN-ACANTO

Properties

CERTO

• **

• **重復*度

• Zerodur光柵

HEIDENHAIN-CERTO

Properties

HEIDENHAIN-METRO

HEIDENHAIN-METRO MT 1200/MT 2500

Properties

HEIDENHAIN-METRO MT 60/MT 101

Properties

SPECTO

• 較*防護能力

• 緊湊型設計

• 密珠導軌

HEIDENHAIN-SPECTO

Properties

應用舉例

選擇海德漢*的長度計有許多理由。它不*技術突出，質量標準*，還有遍布*的海德漢銷售和服務網絡。

這些應用舉例表明長度計適用于和不同的應用領域。

HEIDENHAIN-CERTO CT 6001
Highest accuracy and repeatability between temperatures of 19 °C and 21 °C with a thermally invariable design

With an accuracy of 0.1 µm and a repeatability of 0.03 µm, the HEIDENHAIN-CERTO length gauge gives you the most exact measurement over a range of 60 mm that the market has to offer. The calibration chart indicates a value for linear error compensation. In combination with an ND 287 evaluation unit, the achievable accuracy improves to +/-0.05 µm.

Using the recommended CS 200 gauge stand even results in a thermally invariable measuring loop. Since the gauge stand and the HEIDENHAIN-CERTO mechanism both consist of Invar (expansion 1 ppm/K) and the scale with 2 µm signal period is manufactured from ZERODUR (expansion 0.1 ppm/K), small variations in temperature, which generally cannot be avoided, do not affect the accuracy. For high-accuracy measurements, such as stations where the finished dimensions are checked, the optional analog module can be used to compensate for deviations in the temperature of the workpiece or the entire system from the standard 20 °C.

The results of tactile measurements in this accuracy range can already be influenced by an unevenness when zeroing the length gauge. For this reason the CS 200 gauge stand fulfills special requirements regarding a flatness of 0.6 µm for the surface relevant to the measurement. For even greater requirements regarding the flatness, the ceramic plate with vacuum suction can be used. This accessory is specified for a flatness of 0.1 µm.

The electrical motor offers three gauging forces and a very constant probing force over the entire measuring range. The heat input by the operator is reduced to a minimum.

Products used in this application

Highlights

HEIDENHAIN-ACANTO
Comprehensive diagnostics functionality thanks to EnDat 2.2 interface

Industry 4.0, among other factors, concerns gaining more information about the quality of each individual machining step and each quality inspection step. HEIDENHAIN ACANTO length gauges provide realistically analyzable information about the measurements. This is made possible with the bidirectional EnDat 2.2 interface. In addition to providing the position value, the interface also provides further information about the length gauge:  

• Valuation numbers supply data about the current state of the length gauge. They therefore enable continuous monitoring of the function reserve of scanning.
• Warnings and alarms allow conclusions to be drawn about components affected by equipment failure.
• The electronic ID plate can be read out and shows all of the length gauge’s specifications.

The subsequent electronics can independently configure the measuring step with the transmitted information. The EnDat 2.2. interface also enables the retransfer of information to the length gauge.  

Two company departments directly benefit from this added value:

• Quality Assurance can determine the quality of measurements with this diagnostics information.  
• Machine Maintenance is able to avoid unnecessary idle times during production thanks to the valuation numbers.  

The valuation numbers are recalculated upon interrogation. The length gauge can thereby detect when a light source is aging or contaminated, for example. The additional information can be provided by all HEIDENHAIN evaluation electronics, and supplementary software or hardware modules are not needed. The following evaluation units are available for the purpose: 

• the ND 287 for single or dual-axis measuring tasks
• the ND 2100G GAGE-CHEK with up to eight measuring channels

These evaluation electronics support the EnDat 2.2 interface and ensure all applications benefit from this diagnosis functionality. 

The absolute scanning of HEIDENHAIN ACANTO length gauges immediately delivers a measured value without the need for a reference run. The length gauges with a measuring range of 12 mm or 30 mm repeatedly measure a new absolute value. Measuring errors from excessive plunger speeds, caused by bounce for example, belong to the past. Today’s HEIDENHAIN ACANTO length gauges are equipped now for future requirements. Evaluating the quality of measurements and the status information of the device provides added value for various departments in the company and helps to design production with greater efficiency.

ACANTO highlights

Products used in this application

HEIDENHAIN-SPECTO ST 1200 and ST 3000
The solution for multipoint inspection apparatuses with station widths of only 15 mm

Multipoint measuring stations are becoming ever more important in production. Typical applications are the simultaneous detection of several measured values or combining single measuring steps during machining.

Length gauges from the HEIDENHAIN SPECTO series feature station widths of less than 15 mm, enabling several length gauges to be positioned in tight spaces. To keep space requirements in the system low, cables can be either axially or radially connected. The length gauge is also ideal for in-process measurements thanks to a protection class to IP67.

Accuracy of ±1 µm is ensured over measuring strokes of 12 mm (with the ST 1200) or 30 mm (with the ST 3000). The repeatability accuracy is typically less than 0.3 µm. This value is possible due to the highly precise ball guide.

HEIDENHAIN offers a range of evaluation electronics for processing the measured values on multipoint inspection apparatuses:

• The ND 2100G GAGE-CHEK with up to eight measuring channels enables values to be displayed and directly evaluated. The scope of the software and hardware enables the saving of processes and responses and the display of PLC functionality with applications.
• The EIB 741 with four measuring channels is an ideal evaluation unit for applications requiring high dynamic measured-value acquisition. The device enables data interrogation every 20 µs.

HEIDENHAIN SPECTO length gauges are therefore the ideal solution for multipoint inspection apparatuses. Combining them with the various evaluation electronics enables perfect configurations according to the specific application.

SPECTO highlights

Evaluation electronics highlights

Products used in this application

HEIDENHAIN-ACANTO AT 3018
Absolute measurement together with the EIB 741 evaluation unit

In highly dynamic measuring tasks, such as on test stands, counting errors can occur in the subsequent electronics when using incremental encoders. These are often caused by excessive speeds or vibrations. The absolute length gauges of the HEIDENHAIN-ACANTO series avoid these counting errors by continuously determining the absolute position value for each request, without needing a reference run.

The diagnostics continually check the current state of the encoder and report it via the respective valuation numbers. Should there be an error in the formation of the position value, an alarm bit is transmitted via the interface. A simple check of the state of the length gauge is then possible together with the diagnostic interface of the EnDat 2.2 protocol. This alarm and diagnostic function in particular is important for securing the process capability of the system in advance. In addition, HEIDENHAIN-ACANTO length gauges feature a sliding guide system with ceramic bushing—the best solution for fulfilling the contrary demands of sturdiness and repeatability. A ball-bush guide gives better repeatability, but is more sensitive to contamination and less sturdy than a sliding guide with ceramic bushing.

In combination with the EIB 741 evaluation unit, a position value can be requested every 100 µs. Per channel the EIB 741 can typically store 250,000 data records as well as transmit approx. 1.2 MB of data in streaming mode over the Ethernet interface. The provided C++ and LabView drivers simplify integration in the machine system. As an alternative, as evaluation units you can use the ND 2100G GAGE-CHEK for up to eight encoders.

ACANTO highlights

EIB 741 highlights

Products used in this application

HEIDENHAIN-METRO MT 1281 MW
Measuring delicate parts with virtually zero force

The measurement of delicate parts, such as those in the watchmaking industry, must not lead to their deformation, otherwise the results could be incorrect or the parts could become damaged. The HEIDENHAIN-METRO MT 1281MW length gauge is particularly suited for such demanding measuring tasks. For measurements with a gauging force of nearly 0 (0.01 N to 0.07 N), it includes a specially paired insert with an exchangeable measuring pin. These extremely low values over a measuring range of 12 mm are also possible thanks to the ball-bush guide with very constant friction conditions and the constantly improving measuring force over the course of five million measuring cycles.

The included plunger lifter gives the operator the most direct control possible over the measuring process. As an alternative, a mechanical cable lifter can achieve a very constant gauging motion. The gauging speed is set with a throttle screw in the bellows. The interaction between the guideway, the ZERODUR scale with 2 µm signal period, and the electronics in the connector makes repeatability better than 0.03 µm possible.

The ND 287 evaluation unit is suitable as a subsequent electronics unit for stand-alone measuring stations. When combined with an MT 1281, a measuring step of 1 nm is possible. Also, it offers a color display and many possibilities for capturing and classifying measurement series as well as creating histograms. The ND 287 thus makes it easier to evaluate the manufacturing process.

Highlights

Products used in this application